The Model 29
Dynamic Mult

1 to 5 multiple, four with manually adjustable attenuation

Requires no power to operate

Only 8HP wide.
. . . . k . .
. . . . . . .
. . . . . . .

Introducing the one module you'd never think you'd need...until you have one.

The third in our utility module series, the Model 29 Dynamic Mult is a unique 1-to-5 signal splitter in which four of the outputs are equipped with manual level pots, allowing for both contour control and signal distribution. The perfect companion for non-attenuated VC inputs, the Model 29 requires no power supply connection to operate as it takes it's ground reference from the cables patched into it.

As with all mults, The Model 29 is not recommended for combining multiple signals to a single output. For that we recommend a Model 9.

Figure 1 - Model 29 Block Diagram

Production Modules:

Model 1 Protected Power Source

Model 9 Mixer/Attenuator

Model 10 Polyphonic Envelope

Model 11 Evil Twin Bandpass Filter

Model 12 State Variable Vactrol Filter

Model 13 Dual Timbral Gates

Model 14 Dual Voltage Processor

Model 15 Complex VCO

Model 16 Spectral Multiplexer

Model 17 Triple Event Timer

Model 23 Analog Shift Register
ELF SERIES

Model 24 Heisenberg Generator

Model 25 Multi-tasking Audio Processor

Model 26 Multi-tasking Control Processor

Model 28 Programmable Tap Clock

Model 29 Dynamic Mult

Model 36 Leveler ELF SERIES

Model 37 ELF LFO ELF SERIES

Model 38 ADSR
ELF SERIES

Model 38A ADSR Expander
ELF SERIES

Model 39 Wave Splicer
ELF SERIES

Model 40 Headphone PreAmp
ELF SERIES

|Planned Modules:

Model 18 Stereo Output Mixer Sub System:

Model 18 Stereo Mixer

Model 18A Expander (VC level/pan)

Model 18B Balanced Stereo Outputs

Model 19 Gate Delay

Model 21 MIlton Controller Series

Model 27 Digital Delay

 . . . . . . .